|
|
The
tenoning plate is attached to
the sliding table via two
hex-socket screws into t-nuts in
the slider t-slot. |
|
|
|
1100mm Crosscut Fence with
tenoning plate illustrating
fence stop on new X-Roll slider |
|
|
|
The fence stop is effective
for 3/4 inch thick parts
that are over 1.10 inches
wide |
|
|
|
This photo illustrates the
fence stop with the tenoning
plate using stock that is 30mm
wide and 17.25mm thick.
This is the minimum size that
will effectively register
against the stop with the
tenoning plate installed. |
|
